README.md 10.4 KB
Newer Older
1
# EduGAIN Connectivity Check Service 2 - ECCS2
Marco Malavolti's avatar
Marco Malavolti committed
2

Marco Malavolti's avatar
Marco Malavolti committed
3
The purpose of the eduGAIN Connectivity Check is to identify eduGAIN Identity Providers (IdP) that are not properly configured. In particular it checks if an IdP properly loads and consumes SAML2 metadata which contains the eduGAIN Service Providers (SP). The check results are published on the public eduGAIN Connectivity Check web page (### NOT-AVAILABLE-YET ###). The main purpose is to increase the service overall quality and user experience of the eduGAIN interfederation service by making federation and Identity Provider operators aware of configuration problems.
Marco Malavolti's avatar
Marco Malavolti committed
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45

The check is performed by sending a SAML authentication request to each eduGAIN IdP and then follow the various HTTP redirects. The expected result is a login form that allows users to authenticate (typically with username/password) or an error message of some form. For those Identity Providers that output an error message, it can be assumed that they don't consume eduGAIN metadata properly or that they suffer from another configuration problem. There are some cases where the check will generate false positives, therefore IdPs can be excluded from checks as is described below.

The Identity Providers are checked once per day. Therefore, the login requests should not have any significant effect on the log entries/statistics of an Identity Provider. Also, no actual login is performed because the check cannot authenticate users due to missing username and password for the IdPs. Only Identity Providers are checked but not the Service Providers.

# Check Performed on the IdPs

The check executed by the service follows these steps:

1. It retrieves the eduGAIN IdPs from eduGAIN Operator Team database via a JSON interface

2. For each IdP that is was not manually disabled by the eduGAIN Operations Team, the check creates a Wayfless URL for each SP involved and retrieves the IdP login page. It expects to find the HTML form with a username and password field. Therefore, no complete login will happen at the Identity Provider because the check stops at the login page.
The SPs used for the check are "Test SP shib 2.4" (https://sp24-test.garr.it/shibboleth) from IDEM GARR AAI and the "AAI Viewer Interfederation Test" (https://attribute-viewer.aai.switch.ch/interfederation-test/shibboleth) from SWITCHaai. These SPs might change in the future if needed.
The SAML authenticatin request is not signed. Therefore, authentication request for any eduGAIN SP could be created because the SP's private key is not needed.

# Limitations

There are some situations where the check cannot work reliably. In those cases it is possible to disable the check for a particular IdP. The so far known cases where the check might generate a false negative are:

* IdP does not support HTTP or HTTPS with at least SSLv3 or TLS1 or newer (these IdPs are insecure anyway)
* IdP is part of a Hub & Spoke federation (some of them manually have to first approve eduGAIN SPs)
* IdP does not use web-based login form (e.g. HTTP Basic Authentication or X.509 login)

# Disable Checks

In cases where an IdP cannot be reliably checked, it might be necessary to [disable the checks for an IdP](mailto:edugain@geant.org?subject=%5BECCS%5D%20Disable%20check%20for%20IdP&body=Dear%20eduGAIN-ECCS%20Admins%0A%0APlease%20exclude%20the%20Identity%20Provider%20with%20the%20following%20entityID%20from%20the%20ECCS%20checks%3A%0A%23entityID%23%0A%0AThe%20reason%20why%20this%20IdP%20should%20be%20excluded%20is%20...%0A%0ABest%20regards%2C%0A%23Your-Name%23).

# On-line interface

The eduGAIN Connectivity Check web pages is available at: https://dev-mm.aai-test.garr.it/eccs2

The tool uses following status for IdPs:

* ERROR (red):
  * The IdP's response contains an HTTP Error or the web page returned does not look like a login page. The most probable causes for this error are HTTP errors (e.g.: 404 error)
  * The IdP most likely does not consume the eduGAIN metadata correctly or it hasn't does not return a web page that looks like a login form. A typical case that falls into this category is when an IdP returns a message "No return endpoint available for relying party" or "No metadata found for relying party".
* OK (green):
  * The IdP most likely correctly consumes eduGAIN metadata and returns a valid login page. This is no guarantee that login on this IdP works for all eduGAIN services but if the check is passed for an IdP, this is probable.
* DISABLE (white)
  * The IdP is excluded from checks because it cannot be checked reliably (see limitations below) affected by some problems that prevent them to consume correctly eduGAIN metadata. The "Page Source" column, when an entity is disabled, shows the reason of the disabling.


46
47
# Requirements Hardware

Marco Malavolti's avatar
Marco Malavolti committed
48
* OS: Debian 9, CentOS 7.8 (tested)
49
50
51
52
53
54
55
* HDD: 10 GB
* RAM: 4 GB
* CPU: >= 2 vCPU

# Requirements Software

* Apache Server + WSGI
56
* Python 3.8 (tested with v3.8.3)
57
58
59
60
* Selenim + Chromium Web Brower

# HOWTO Install and Configure

Marco Malavolti's avatar
Marco Malavolti committed
61
62
63
64
65
66
67
68
69
70
71
72
73
74
## Install Python 3.8.x

### CentOS 7 requirements

1. Update the system packages:
   * `sudo yum -y update`

2. Install the Development Tools:
   * `sudo yum -y groupinstall "Development Tools"`

3. Install needed packages to build python:
   * `sudo yum -y install openssl-devel bzip2-devel libffi-devel wget`

### Debian requirements
75
76
77
78
79
80
81

1. Update the system packages:
   * `sudo apt update ; sudo apt upgrade -y`

2. Install needed packages to build python:
   * `sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev`

Marco Malavolti's avatar
Marco Malavolti committed
82
### Python 3.8
83

Marco Malavolti's avatar
Marco Malavolti committed
84
85
1. Download the last version of Python 3.8.x from https://www.python.org/downloads/source/:
   * `wget https://www.python.org/ftp/python/3.8.3/Python-3.8.3.tgz -O /usr/local/src/Python-3.8.3.tar.gz`
86

Marco Malavolti's avatar
Marco Malavolti committed
87
88
89
2. Extract Python source package:
   * `cd /usr/local/src/`
   * `tar xzf Python-3.8.3.tar.gz`
90

Marco Malavolti's avatar
Marco Malavolti committed
91
92
93
94
95
96
3. Build Python from the source package:
   * `cd /usr/local/src/Python-3.8.3`
   * `./configure --enable-optimizations`
   * `make -j 4`

4. Install Python 3.8.x (without replacing the system `python3` command) under `/usr/local/bin/python3.8`:
97
98
99
   * `sudo make altinstall`
   * `python3.8 --version`

Marco Malavolti's avatar
Marco Malavolti committed
100
5. Create link of Python3.8 for scripts:
101
102
   * `sudo ln -s /usr/local/bin/python3.8 /usr/bin/python3.8`

103
# Install requirements for uWSGI used by ECCS2 API:
104

Marco Malavolti's avatar
Marco Malavolti committed
105
106
107
108
* Debian:
  * `sudo apt-get install libpcre3 libpcre3-dev libapache2-mod-proxy-uwsgi build-essentials python3-dev unzip`
* CentOS:
  * `sudo yum install mod_proxy_uwsgi unzip`
Marco Malavolti's avatar
Marco Malavolti committed
109
  * Enable ECCS2 for SELinux:
Marco Malavolti's avatar
Marco Malavolti committed
110
111
    * `semanage fcontext -a -t httpd_sys_content_t "/opt/eccs2(/.*)?"`
    * `restorecon -R -a /opt/eccs2/`
112

Marco Malavolti's avatar
Marco Malavolti committed
113
# Install Selenium & Chromedriver
114

Marco Malavolti's avatar
Marco Malavolti committed
115
116
117
118
119
* `python3.8 -m pip install --upgrade pip`
* `python3.8 -m pip install selenium virtualenv uwsgi`
* `sudo wget https://chromedriver.storage.googleapis.com/83.0.4103.39/chromedriver_linux64.zip -O /usr/local/src/chromedriver_linux64.zip`
* `cd /usr/bin/`
* `sudo unzip /usr/local/src/chromedriver_linux64.zip`
120

Marco Malavolti's avatar
Marco Malavolti committed
121
122
123
124
125
Note: Pay attetion on the chromedriver version:
* Debian 9 (stretch):
  * `chromium -version` => Chromium 73.0.3683.75 => https://chromedriver.storage.googleapis.com/73.0.3683.68/chromedriver_linux64.zip
* CentOS 7.8:
  * `chromium-browser -version` => Chromium 83.0.4103.116 => https://chromedriver.storage.googleapis.com/83.0.4103.39/chromedriver_linux64.zip
126

Marco Malavolti's avatar
Marco Malavolti committed
127
# Install Chromium needed by Selenium
128

Marco Malavolti's avatar
Marco Malavolti committed
129
130
* Debian:
  * `sudo apt install chromium git jq`
131

Marco Malavolti's avatar
Marco Malavolti committed
132
133
134
135
136
137
138
139
140
* CentOS:
  * `sudo yum install -y epel-release`
  * `sudo yum install -y chromium git jq`

# ECCS2

## Install

* `cd /opt ; git clone https://github.com/malavolti/eccs2.git`
141
142
* `cd eccs2`
* `virtualenv -p python38 eccs2venv`
143
* `source eccs2venv/bin/activate`   (`deactivate` to exit Virtualenv)
Marco Malavolti's avatar
Marco Malavolti committed
144
  * `pip install --upgrade pip`
145
146
  * `pip install -r requirements.txt`

Marco Malavolti's avatar
Marco Malavolti committed
147
## Configure
148

Marco Malavolti's avatar
Marco Malavolti committed
149
1. Configure ECCS2 properties:
Marco Malavolti's avatar
Marco Malavolti committed
150
   * `vim eccs2properties.py` (and change it upon your needs)
151

152
2. Configure ECCS2 cron job for your local user (`debian` into this example):
Marco Malavolti's avatar
Marco Malavolti committed
153
   * `sudo crontab -u debian -e` (Debian) or `sudo crontab -u centos -e` (CentOS)
154

155
156
157
     ```bash
     0 4 * * * /bin/bash /opt/eccs2/cleanAndRunEccs2.sh > /opt/eccs2/logs/eccs2cron.log 2>&1  
     ```
Marco Malavolti's avatar
Marco Malavolti committed
158

159
3. Configure the ECCS2 systemd service to enable its API:
Marco Malavolti's avatar
Marco Malavolti committed
160
161
162
   * `vim /opt/eccs2/eccs2.ini` (and change the "`User`" and the "`Group`" values)
   * `vim /opt/eccs2/eccs2.service` (and change the "`User`" and the "`Group`" values)
   * `sudo cp /opt/eccs2/eccs2.service /etc/systemd/system/eccs2.service`
163
164
165
   * `sudo systemctl daemon-reload`
   * `sudo systemctl enable eccs2.service`
   * `sudo systemctl start eccs2.service`
166

167
4. Configure Apache for the ECCS2 Web side:
Marco Malavolti's avatar
Marco Malavolti committed
168
169
170
171
172
   * Debian:
     * `sudo cp /opt/eccs2/eccs2-debian.conf /etc/apache2/conf-available/eccs2.conf`
     * `sudo a2enconf eccs2.conf`
     * `sudo systemctl restart apache2.service`
   * CentOS:
Marco Malavolti's avatar
Marco Malavolti committed
173
     * `sudo cp /opt/eccs2/eccs2-centos.conf /etc/httpd/conf.d/eccs2.conf`
Marco Malavolti's avatar
Marco Malavolti committed
174
     * `sudo systemctl restart httpd.service`
175

Marco Malavolti's avatar
Marco Malavolti committed
176
## Execute
177

Marco Malavolti's avatar
Marco Malavolti committed
178
  * `cd /opt/eccs2`
179
180
181
  * `./cleanAndRunEccs2.py` (to run a full and clean check)
  * `./runEccs2.py` (to run a full check on the existing inputs)
  * `./runEccs2.py --idp <IDP-ENTITYID>` (to run check on a single IdP)
Marco Malavolti's avatar
Marco Malavolti committed
182
  * `./runEccs2.py --test` (to run a full check without effects)
183
  * `./runEccs2.py --idp <IDP-ENTITYID> --test` (to run check on a single IdP without effects)
184

Marco Malavolti's avatar
Marco Malavolti committed
185
186
  The check will run a second time for those IdPs that failed the first execution of the script.
  If something prevent the good execution of the ECCS2's check, the `/opt/eccs2/logs/failed-cmd.sh` file will be not empty at the end of the execution.
Marco Malavolti's avatar
Marco Malavolti committed
187

Marco Malavolti's avatar
Marco Malavolti committed
188
  The "--test" parameter will not change the result of ECCS2, but will write the output on the `logs/stdout_idp_YYYY-MM-DD.log`,`logs/stderr_idp_YYYY-MM-DD.log` and `logs/failed-cmd-idp.sh` files.
Marco Malavolti's avatar
Marco Malavolti committed
189

190
191
# ECCS2 API Development Server

Marco Malavolti's avatar
Marco Malavolti committed
192
* `cd /opt/eccs2 ; ./api.py`
193

194
195
196
197
# ECCS2 API JSON

* `/api/test` (Trivial Test)
* `/api/eccsresults` (Return the results of the last check ready for ECCS Gui)
Marco Malavolti's avatar
Marco Malavolti committed
198
* `/api/eccsresults?<parameter1>=<value1>&<parameter2>=<value2>`:
199
  * `date=2020-02-20` (select date)
Marco Malavolti's avatar
Marco Malavolti committed
200
  * `idp=https://idp.example.org/idp/shibboleth` (select a specific idp)
201
202
203
204
205
206
207
  * `status=` (select specific ECCS2 status)
    * 'OK'
    * 'ERROR'
    * 'DISABLED'
  * `reg_auth=https://reg.auth.example.org` (select a specific Registration Authority)
* `/api/fedstats`
* `/api/fedstats?reg_auth=https://reg.auth.example.org`:
208

209
210
211
212

# UTILITY FOR WEB INTERFACE

The available dates are provided by the first and the last file created into the `output/` directory
213
214
215

To clean the ECCS2 results from files older than last 7 days use:

Marco Malavolti's avatar
Marco Malavolti committed
216
* `clean7daysOldFiles.sh`