README.md 12.3 KB
Newer Older
1
# EduGAIN Connectivity Check Service 2 - ECCS2
Marco Malavolti's avatar
Marco Malavolti committed
2

Marco Malavolti's avatar
Marco Malavolti committed
3
4
5
6
7
8
9
10
11
12
13
14
1. [Introduction](#introduction)
2. [Check Performed on the IdPs](#check-performed-on-the-idps)
3. [Limitations](#limitations)
4. [Disable Checks](#disable-checks)
5. [On-line interface](#on-line-interface)
6. [Requirements Hardware](#requirements-hardware)
7. [Requirements Software](#requirements-software)
8. [HOWTO Install and Configure](#howto-install-and-configure)
   * [Install Python 3.8.x](#install-python-38x)
     + [CentOS 7 requirements](#centos-7-requirements)
     + [Debian requirements](#debian-requirements)
     + [Python 3.8](#python-38)
Marco Malavolti's avatar
Marco Malavolti committed
15
9. [Install the Chromedriver](#install-the-chromedriver)
Marco Malavolti's avatar
Marco Malavolti committed
16
10. [Install Chromium needed by Selenium](#install-chromium-needed-by-selenium)
17
11. [ECCS2 Script](#eccs2-script)
Marco Malavolti's avatar
Marco Malavolti committed
18
19
    * [Install](#install)
    * [Configure](#configure)
20
    * [Execute](#execute)    
Marco Malavolti's avatar
Marco Malavolti committed
21
12. [ECCS2 API Server (UWSGI)](#eccs2-api-server-uwsgi)
Marco Malavolti's avatar
Marco Malavolti committed
22
23
    * [Install](#install-1)
    * [Configure](#configure-1)
Marco Malavolti's avatar
Marco Malavolti committed
24
25
26
13. [ECCS2 API JSON](#eccs2-api-json)
14. [Utility for web interface](#utility-for-web-interface)
15. [Utility for developers](#utility-for-developers)
27
    * [ECCS2 API Development Server](#eccs2-api-development-server)
Marco Malavolti's avatar
Marco Malavolti committed
28
16. [Authors](#authors)
Marco Malavolti's avatar
Marco Malavolti committed
29
30
31

# Introduction

Marco Malavolti's avatar
Marco Malavolti committed
32
The purpose of the eduGAIN Connectivity Check is to identify eduGAIN Identity Providers (IdP) that are not properly configured. In particular it checks if an IdP properly loads and consumes SAML2 metadata which contains the eduGAIN Service Providers (SP). The check results are published on the public eduGAIN Connectivity Check web page (### NOT-AVAILABLE-YET ###). The main purpose is to increase the service overall quality and user experience of the eduGAIN interfederation service by making federation and Identity Provider operators aware of configuration problems.
Marco Malavolti's avatar
Marco Malavolti committed
33
34
35
36
37
38
39
40
41
42
43
44

The check is performed by sending a SAML authentication request to each eduGAIN IdP and then follow the various HTTP redirects. The expected result is a login form that allows users to authenticate (typically with username/password) or an error message of some form. For those Identity Providers that output an error message, it can be assumed that they don't consume eduGAIN metadata properly or that they suffer from another configuration problem. There are some cases where the check will generate false positives, therefore IdPs can be excluded from checks as is described below.

The Identity Providers are checked once per day. Therefore, the login requests should not have any significant effect on the log entries/statistics of an Identity Provider. Also, no actual login is performed because the check cannot authenticate users due to missing username and password for the IdPs. Only Identity Providers are checked but not the Service Providers.

# Check Performed on the IdPs

The check executed by the service follows these steps:

1. It retrieves the eduGAIN IdPs from eduGAIN Operator Team database via a JSON interface

2. For each IdP that is was not manually disabled by the eduGAIN Operations Team, the check creates a Wayfless URL for each SP involved and retrieves the IdP login page. It expects to find the HTML form with a username and password field. Therefore, no complete login will happen at the Identity Provider because the check stops at the login page.
Marco Malavolti's avatar
Marco Malavolti committed
45
The SPs used for the check are "Test SP shib 2.4" (https://sp-demo.idem.garr.it/shibboleth) from IDEM GARR AAI and the "AAI Viewer Interfederation Test" (https://attribute-viewer.aai.switch.ch/interfederation-test/shibboleth) from SWITCHaai. These SPs might change in the future if needed.
Marco Malavolti's avatar
Marco Malavolti committed
46
47
48
49
50
51
52
53
54
55
56
57
The SAML authenticatin request is not signed. Therefore, authentication request for any eduGAIN SP could be created because the SP's private key is not needed.

# Limitations

There are some situations where the check cannot work reliably. In those cases it is possible to disable the check for a particular IdP. The so far known cases where the check might generate a false negative are:

* IdP does not support HTTP or HTTPS with at least SSLv3 or TLS1 or newer (these IdPs are insecure anyway)
* IdP is part of a Hub & Spoke federation (some of them manually have to first approve eduGAIN SPs)
* IdP does not use web-based login form (e.g. HTTP Basic Authentication or X.509 login)

# Disable Checks

58
59
60
61
62
63
In cases where an IdP cannot be reliably checked, it is necessary to create or enrich the `robots.txt` file on the IdP's web root with:

```bash
User-agent: ECCS
Disallow: /
```
Marco Malavolti's avatar
Marco Malavolti committed
64
65
66

# On-line interface

Marco Malavolti's avatar
Marco Malavolti committed
67
The test eduGAIN Connectivity Check web pages is available at: https://technical-test.edugain.org/eccs2
Marco Malavolti's avatar
Marco Malavolti committed
68
69
70
71
72
73

The tool uses following status for IdPs:

* ERROR (red):
  * The IdP's response contains an HTTP Error or the web page returned does not look like a login page. The most probable causes for this error are HTTP errors (e.g.: 404 error)
  * The IdP most likely does not consume the eduGAIN metadata correctly or it hasn't does not return a web page that looks like a login form. A typical case that falls into this category is when an IdP returns a message "No return endpoint available for relying party" or "No metadata found for relying party".
Marco Malavolti's avatar
Marco Malavolti committed
74
  * The IdP has a problem with its SSL certificate.
Marco Malavolti's avatar
Marco Malavolti committed
75
76
* OK (green):
  * The IdP most likely correctly consumes eduGAIN metadata and returns a valid login page. This is no guarantee that login on this IdP works for all eduGAIN services but if the check is passed for an IdP, this is probable.
Marco Malavolti's avatar
Marco Malavolti committed
77
* DISABLED (white)
Marco Malavolti's avatar
Marco Malavolti committed
78
  * The IdP is excluded because it cannot be checked reliably. The "Page Source" column, when an entity is disabled, shows the reason of the disabling.
Marco Malavolti's avatar
Marco Malavolti committed
79

80
81
# Requirements Hardware

Marco Malavolti's avatar
Marco Malavolti committed
82
* OS: Debian 9, CentOS 7.8 (tested)
83
84
* HDD: 10 GB
* RAM: 4 GB
85
* CPU: >= 2 vCPU (suggested)
86
87
88
89

# Requirements Software

* Apache Server + WSGI
90
* Python 3.8 (tested with v3.8.3,v3.8.5)
91
92
93
94
* Selenim + Chromium Web Brower

# HOWTO Install and Configure

95
96
97
98
## Download ECCS2 Repository

* `cd $HOME ; git clone https://github.com/malavolti/eccs2.git`

Marco Malavolti's avatar
Marco Malavolti committed
99
100
101
102
103
104
105
106
107
108
109
110
111
112
## Install Python 3.8.x

### CentOS 7 requirements

1. Update the system packages:
   * `sudo yum -y update`

2. Install the Development Tools:
   * `sudo yum -y groupinstall "Development Tools"`

3. Install needed packages to build python:
   * `sudo yum -y install openssl-devel bzip2-devel libffi-devel wget`

### Debian requirements
113
114
115
116
117
118
119

1. Update the system packages:
   * `sudo apt update ; sudo apt upgrade -y`

2. Install needed packages to build python:
   * `sudo apt install build-essential zlib1g-dev libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libreadline-dev libffi-dev`

Marco Malavolti's avatar
Marco Malavolti committed
120
### Python 3.8
121

122
123
1. Download the last version of Python 3.8.x from https://www.python.org/downloads/source/ into your home:
   * `wget https://www.python.org/ftp/python/3.8.5/Python-3.8.5.tgz -O $HOME/eccs2/Python-3.8.5.tgz`
124

Marco Malavolti's avatar
Marco Malavolti committed
125
2. Extract Python source package:
126
127
   * `cd $HOME/eccs2/`
   * `tar xzf Python-3.8.5.tgz`
128

Marco Malavolti's avatar
Marco Malavolti committed
129
3. Build Python from the source package:
130
131
132
133
134
135
136
137
138
139
140
141
   * `cd $HOME/eccs2/Python-3.8.5`
   * `./configure --prefix=$HOME/eccs2/python`
   * `make`

4. Install Python 3.8.x under `$HOME/eccs2/python`:
   * `make install`
   * `$HOME/eccs2/python/bin/python3.8 --version`
 
   This will install python under your $HOME directory.
   
5. Remove useless things:
   * `rm -Rf $HOME/eccs2/Python-3.8.5 $HOME/eccs2/Python-3.8.5.tgz`
142

Marco Malavolti's avatar
Marco Malavolti committed
143
# Install Chromium needed by Selenium
144

Marco Malavolti's avatar
Marco Malavolti committed
145
* Debian:
Marco Malavolti's avatar
Marco Malavolti committed
146
147
  * `sudo apt install chromium git jq`

Marco Malavolti's avatar
Marco Malavolti committed
148
* CentOS:
Marco Malavolti's avatar
Marco Malavolti committed
149
150
  * `sudo yum install -y epel-release`
  * `sudo yum install -y chromium git jq`
151

Marco Malavolti's avatar
Marco Malavolti committed
152
# Install the Chromedriver
153

Marco Malavolti's avatar
Marco Malavolti committed
154
* `cd $HOME/eccs2/python/bin`
155
156
157
158
* `wget https://chromedriver.storage.googleapis.com/83.0.4103.39/chromedriver_linux64.zip -O $HOME/eccs2/chromedriver_linux64.zip`
* `cd $HOME/eccs2`
* `unzip chromedriver_linux64.zip`
* `rm chromedriver_linux64.zip`
159

Marco Malavolti's avatar
Marco Malavolti committed
160
161
162
163
164
Note: Pay attetion on the chromedriver version:
* Debian 9 (stretch):
  * `chromium -version` => Chromium 73.0.3683.75 => https://chromedriver.storage.googleapis.com/73.0.3683.68/chromedriver_linux64.zip
* CentOS 7.8:
  * `chromium-browser -version` => Chromium 83.0.4103.116 => https://chromedriver.storage.googleapis.com/83.0.4103.39/chromedriver_linux64.zip
165

166
# ECCS2 Script
Marco Malavolti's avatar
Marco Malavolti committed
167
168
169

## Install

170
171
172
* `cd $HOME/eccs2`
* `./python/bin/python3.8 -m pip install virtualenv`
* `$HOME/eccs2/python/bin/virtualenv --python=$HOME/eccs2/python/bin/python3.8 eccs2venv`
173
* `source eccs2venv/bin/activate`   (`deactivate` to exit Virtualenv)
174
  * `python -m pip install -r requirements.txt`
175

Marco Malavolti's avatar
Marco Malavolti committed
176
## Configure
177

Marco Malavolti's avatar
Marco Malavolti committed
178
1. Configure ECCS2 properties:
Marco Malavolti's avatar
Marco Malavolti committed
179
   * `vim eccs2properties.py` (and change it upon your needs)
180

181
182
183
184
185
186
187
2. Change `PATH` by addign the virtualenv Python `bin` dir:
   * CentOS:
     * `vim $HOME/.bash_profile`
     * `PATH=$PATH:$HOME/.local/bin:$HOME/bin` becomes `PATH=$HOME/eccs2/eccs2venv/bin:$HOME/.local/bin:$HOME/bin:$PATH`
   * Debian:
     * `vim $HOME/.profile`
     * `PATH="$HOME/bin:$PATH"` becomes `PATH="$HOME/eccs2/eccs2venv/bin:$HOME/bin:$PATH"`
188
189
190
   
3. Configure ECCS2 cron job for the local user:
   * `crontab -e`
191

192
     ```bash
Marco Malavolti's avatar
Marco Malavolti committed
193
194
     SHELL=/bin/bash

195
     0 4 * * * /bin/bash $HOME/eccs2/cleanAndRunEccs2.sh > $HOME/eccs2/logs/eccs2cron.log 2>&1  
196
     ```
Marco Malavolti's avatar
Marco Malavolti committed
197

Marco Malavolti's avatar
Marco Malavolti committed
198
## Execute
199

200
  * `cd $HOME/eccs2`
201
202
203
  * `./cleanAndRunEccs2.py` (to run a full and clean check)
  * `./runEccs2.py` (to run a full check on the existing inputs)
  * `./runEccs2.py --idp <IDP-ENTITYID>` (to run check on a single IdP)
Marco Malavolti's avatar
Marco Malavolti committed
204
  * `./runEccs2.py --test` (to run a full check without effects)
205
  * `./runEccs2.py --idp <IDP-ENTITYID> --test` (to run check on a single IdP without effects)
206

Marco Malavolti's avatar
Marco Malavolti committed
207
  The check will run a second time for those IdPs that failed the first execution of the script.
208
  If something prevent the good execution of the ECCS2's check, the `logs/failed-cmd.sh` file will be not empty at the end of the execution.
Marco Malavolti's avatar
Marco Malavolti committed
209

Marco Malavolti's avatar
Marco Malavolti committed
210
  The "--test" parameter will not change the result of ECCS2, but will write the output on the `logs/stdout_idp_YYYY-MM-DD.log`,`logs/stderr_idp_YYYY-MM-DD.log` and `logs/failed-cmd-idp.sh` files.
Marco Malavolti's avatar
Marco Malavolti committed
211

212
# ECCS2 API Server (uWSGI)
Marco Malavolti's avatar
Marco Malavolti committed
213

214
## Install
Marco Malavolti's avatar
Marco Malavolti committed
215

216
217
218
219
220
221
222
223
224
225
1. Install requirements:
   * Debian:
     * `sudo apt-get install libpcre3 libpcre3-dev libapache2-mod-proxy-uwsgi build-essentials python3-dev unzip`
   * CentOS:
     * `sudo yum install mod_proxy_uwsgi unzip`
     * Configure SElinux to enable ECCS2:
       * `sudo semanage fcontext -a -t httpd_sys_content_t "$HOME/eccs2(/.*)?"`
       * `sudo restorecon -R -e $HOME/eccs2/`
       * `sudo setsebool -P httpd_can_network_connect 1`
 
Marco Malavolti's avatar
Marco Malavolti committed
226
227
228
## Configure

1. Add the systemd service to enable ECCS2 API:
229
   * `cd $HOME/eccs2`
Marco Malavolti's avatar
Marco Malavolti committed
230
231
   * `cp eccs2.ini.template eccs2.ini`
   * `cp eccs2.service.template eccs2.service`
232
233
234
235
236
237
   * `vim eccs2.ini` (and change "`uid`", "`gid`" and "`base`" values opportunely)
   * `vim eccs2.service` (and change "`User`","`Group`","`WorkingDirectory`","`RuntimeDirectory`","`ExecStart`" values opportunely)
   * `sudo cp $HOME/eccs2/eccs2.service /etc/systemd/system/eccs2.service`
   * `sudo systemctl daemon-reload`
   * `sudo systemctl enable eccs2.service`
   * `sudo systemctl start eccs2.service`
238

Marco Malavolti's avatar
Marco Malavolti committed
239
2. Configure Apache for ECCS2 web side:
240
241
242
243
244
245
246
247
248
   * Debian:
     * `sudo cp $HOME/eccs2/eccs2-debian.conf /etc/apache2/conf-available/eccs2.conf`
     * `sudo a2enconf eccs2.conf`
     * `sudo chgrp www-data $HOME ; sudo chmod g+rx $HOME` (Apache needs permission to access the $HOME dir)
     * `sudo systemctl restart apache2.service`
   * CentOS:
     * `sudo cp $HOME/eccs2/eccs2-centos.conf /etc/httpd/conf.d/eccs2.conf`
     * `sudo chgrp apache $HOME ; sudo apache g+rx $HOME` (Apache needs permission to access the $HOME dir)
     * `sudo systemctl restart httpd.service`
249

250
251
# ECCS2 API JSON

252
* `/api/eccsresults` (Return the results of the last check ready for ECCS web interface)
Marco Malavolti's avatar
Marco Malavolti committed
253
* `/api/eccsresults?<parameter1>=<value1>&<parameter2>=<value2>`:
254
  * `date=2020-02-20` (select date)
Marco Malavolti's avatar
Marco Malavolti committed
255
  * `idp=https://idp.example.org/idp/shibboleth` (select a specific idp)
256
257
258
259
260
261
262
  * `status=` (select specific ECCS2 status)
    * 'OK'
    * 'ERROR'
    * 'DISABLED'
  * `reg_auth=https://reg.auth.example.org` (select a specific Registration Authority)
* `/api/fedstats`
* `/api/fedstats?reg_auth=https://reg.auth.example.org`:
263

Marco Malavolti's avatar
Marco Malavolti committed
264
# Utility for web interface
265
266

The available dates are provided by the first and the last file created into the `output/` directory
267

268
To clean the ECCS2 results from files older than last 7 days use (modify it on your needs):
269

Marco Malavolti's avatar
Marco Malavolti committed
270
271
272
273
274
275
276
* `crontab -e`

  ```bash
  SHELL=/bin/bash

  0 5 * * * /bin/bash $HOME/eccs2/clean7daysOldFiles.sh > $HOME/eccs2/logs/clean7daysOldFiles.log 2>&1  
  ```
Marco Malavolti's avatar
Marco Malavolti committed
277

278
279
280
281
282
283
# Utility for developers

## ECCS2 API Development Server

* `cd $HOME/eccs2 ; ./api.py`

Marco Malavolti's avatar
Marco Malavolti committed
284
285
286
287
288
# Authors

## Original Author

 * Marco Malavolti (marco.malavolti@garr.it)